Experience a symphony of power and sound with the Eventuri V2 Carbon Fibre Air Intake Kit, designed to unleash the full potential of your BMW G82 G83 M4 & CSL, G80 G81 M3, G81 M3, and G87 M2. This cutting-edge intake system not only enhances your engine's performance but also delivers a captivating auditory experience, transforming every drive into an unforgettable journey.
Upgrade your BMW's performance and sound with the Eventuri V2 Carbon Fibre Air Intake Kit. This isn't just an intake; it's a transformative experience that will elevate your driving pleasure to new heights.
Key Features:
-
Unleashed Performance: The Eventuri V2 Air Intake Kit maximises airflow into your engine, resulting in increased power, torque, and throttle response. Experience a significant boost in performance that will leave you exhilarated every time you accelerate.
-
Enhanced Sound: The unique design of the Eventuri intake system produces a captivating symphony of turbocharger sounds, immersing you in the heart of your BMW's S58 engine. The sound is both exhilarating and refined, adding an extra layer of excitement to every drive.
-
Superior Filtration: The Eventuri intake system features a high-performance air filter that effectively traps dust, debris, and other contaminants, ensuring your engine receives clean, filtered air for optimal performance and longevity.
-
Precision Engineering: Crafted from high-quality carbon fibre, the Eventuri Air Intake Kit is both lightweight and durable, ensuring a perfect fit and long-lasting performance.
-
Easy Installation: The kit comes with all the necessary hardware and instructions for a straightforward installation process.
-
Customisable Options: Choose from of gloss or matt finish options to personalise your intake system and match your BMW's aesthetic.
Additional Benefits:
-
Improved Fuel Efficiency: The Eventuri V2 Air Intake Kit can help improve your BMW's fuel economy, reducing your fuel consumption and operating costs.
-
Reduced Heat Soak: The carbon fibre construction helps to dissipate heat, reducing intake air temperatures and improving engine performance in hot conditions.
-
Enhanced Durability: The high-quality materials and precision engineering ensure that your Eventuri V2 Air Intake Kit will last for years to come.
Elevate your BMW's performance and sound with the Eventuri V2 Carbon Fibre Air Intake Kit. Experience the thrill of increased power, captivating sound, and enhanced efficiency. Don't settle for ordinary; upgrade to Eventuri and transform your driving experience.
Performance Gain
13-18hp, 12-16ft-lb (Stock Tune)
Turbo Inlet Area Increased up to 160%
Filtration Area Increased up to 40%
Why Eventuri?
Presenting an intake which truly sets a benchmark for the BMW G87 M2 and G80 G82 M3/M4 platform. We have carried out intensive R&D to develop an intake which not only improves on the stock M3/M4 but also is future proof in its capacity to cater for high powered builds well in excess of 1000hp. Our system is a complete redesign from the airboxes to the turbo inlets with the aim of reducing pressure loss while increasing the flow rate and keeping inlet temperatures low. We have maximised the usage of the available space to employ 2 custom made filters with a 40% larger filtration area than stock. These are used in our Patented Venturi housings to smoothly funnel the air to the turbo inlets. The inlets themselves are up to 160% larger in cross sectional area than stock and are designed with an advanced dimpled inner surface to reduce frictional losses between the flow and the wall boundary. By allowing a “cushion” of air at the wall surface, airflow is able to move through the inlets at higher flow rates with reduced pressure loss. This allows the turbos to draw air with less resistance and therefore reduce the wastegate duty cycle resulting in higher overall performance.
Unmatched Design and Performance Characteristics:
- Patented Carbon Fibre Housings: Our innovative design incorporates a patented Venturi housing to create a smooth, laminar airflow path for maximum efficiency. This surpasses a simple cone filter with a heat shield, offering a truly performance-driven solution.
- Superior Filtration: The high-flow, large-surface-area filter ensures exceptional engine protection while maximizing airflow for optimal performance.
- Increased Flow Capacity: The restrictive stock intake tube is replaced with a larger diameter option for improved airflow and unimpeded performance.
Watch our video review for the M2 G87
Watch our video review for the M4 G82 G83
The Eventuri Difference
The G87 M2, G80 M3 & G82 M4 Eventuri system uses our Patented Carbon Fiber Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo.
Dyno Testing
This intake has been independently dyno tested by BR Performance in Belgium. Tests were done back to back against the stock airbox and several runs were taken with each configuration. The car tested was without charcoal filters. We took the best results from the stock airbox and the best from the Eventuri system. The dyno results show a consistent gain throughout the RPM range which can be attributed to the turbos reaching peak boost earlier and with a lower wastegate duty cycle due to the higher efficiency of the intake system. This gain is despite the dyno cell temperatures rising from 11.8 deg C for the stock system tests to almost 16 deg C for the Eventuri tests. The performance gain translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline.
IAT Testing
Turbo charged cars can build up a lot of engine bay heat which can be detrimental to performance if the intake system is not sealed against it. Even with intercoolers and charge coolers, it is important to minimise Inlet Air Temperatures (IATs) as these cooling devices work with an efficiency ratio so the output air temperature is affected by the input air temperature. Derestricting the intake by using open cones, even if heat shielded will inevitably pull in hot air from the engine bay. Our system being fully sealed solves this problem while still derestricting the flow path using bigger volumes. To demonstrate, we data logged air temperatures using thermocouples just before each turbo. Comparisons were taken between stock and Eventuri on the same day with the same ambient conditions. Our M3 was allowed to heat soak and then it was accelerated from 30mph to 90mph in 6th gear to measure the change in temperature across each run. At 90mph, throttle was released and brakes were applied to 30mph at which point the car accelerated again to 90mph. A total of 3 pulls were made with both intake configurations.
The first graph shows the temperatures on before both turbos with eth stock airbox on the left and the Eventuri intake on the right. Due to scaling, the axes are not perfectly matched between both graphs but the numbers can be clearly seen. As expected, the RHS of the intake showed similar data between stock and Eventuri since the flow path and materials are similar. However, the LHS intake shows a significant improvement in IAT for the Eventuri. This can be seen in the second graph where the 2 charts are overlaid. On each successive pull the Eventuri shows a lower IAT as compared to stock and also the spike in temperature as throttle is lifted is significantly lower with the Eventuri. This difference is down to the more direct flow path with the Eventuri and also the materials used in the turbo inlet.
Technical Specification
The Eventuri G8X M2/M3/M4 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Each intake system consists of:
- 2 x Carbon Fiber Patented Venturi Filter Housings
- 2 x Bespoke High Flow Dry Cone Filters
- 2 x Carbon Fiber Inlet Ducts
- Carbon Fiber Intake Tube
- 2 Thermoplastic Turbo Inlets
- Laser Cut Stainless Steel Brackets
- Custom Flexible Hose
- CNC Machined Bracket Mounts and Reinforcement Rings
FILTER HOUSING ASSEMBLIES
The filter housings comprise of our bespoke generation 2 filters, aluminium inlet cowls and stainless steel brackets. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the tube section which then connects to the turbo tubes. This changes the flow path from the OEM airbox where airflow enters the front of the airbox, changes direction by 90 degrees to travel through the panel filter and then changes direction again by 90 degrees to move through the tube section. Our system is a lot more direct with airflow entering the front of the filter housing and and moving into the tube section without any abrupt direction changes. The result is a smoother path from the filter to the turbo inlet tube and therefore the turbo is able to function with less drag.
In order to achieve the highest flow rate possible we designed a new filter element to make as much use of the space available in the engine bay as possible. This new filter has an outside diameter of 192mm or 7.6" and when flow tested with a housing using a 4" opening is able to flow up to 900 CFM at 28" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.
PATENTED TECHNOLOGY
Our patented filter housing has a smooth reduction in cross sectional area as it shrouds the filter and tapers down to the tubing. This geometry invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Our bespoke filters aid the airflow moving through the housings and allow for an even velocity profile as the airflow exits the housings. Further details can be read in the Technology and Filters pages.
TURBO INLETS
The biggest restriction in the stock system are the turbo inlets. The G8X M3/M4 has an inlet for each turbo and we were able to significantly increase the sizes of both of them. By increasing their sizes, the turbos are able to pull in air with less restriction hence allowing for a quicker spool. In the following photos you can see the differences in the sizes. Although the benefit may be small for a stock car, we expect these larger inlets to be more beneficial for higher states of tune where the target boost pressures are increased.
We could have finalised the designs here however, we wanted to push the boundaries further and introduce a novel dimpled pattern to the inside surfaces. In theory, small dimples can increase the flow rate by reducing the frictional pressure losses through a tube. We have explained this in detail in our video which can be found in the Video Tab HERE.
A lot of R&D went into simulating different sizes and shapes until we settled on an optimised version which demonstrated a higher flow rate through the inlets in comparison with a smooth surface. Applying such an intricate was only possible due to the advanced manufacturing technique we employed to make the inlets, where traditional methods would not have given the accuracy required. The dimples create an "air cushion" affect over the surface of the inlet which then allows the main body of air to "slip" with less friction through the body into the turbo. This results in a more even velocity profile in a dimpled tube with the net affect being a higher velocity for the same boundary conditions. Here are the CFD simulations showing the re-circulations in the dimples and the higher velocity in the dimpled tube. Further reading can be done from these scientific papers:
Flow studies on increasing the efficiency of the inlet manifold.
Hydrodynamics of laminar flow through dimpled pipes.
CARBON DUCTS
To ensure that the intake is fully sealed, the filter housings are mated to these carbon ducts which route cold air from the stock entry locations behind the headlamps. Made from prepreg carbon fiber, the ducts ensure that the engine bay heat is blocked from entering the filters. Simply having heat shields would not work as effectively since they cannot be air tight. There are many small details designed into the ducts such as the machined mounts to secure them to the stock airbox locations and the laser cut bracket work.
CARBON MAIN TUBE
The filter housing on the right side of the engine is connected to a long tube to route the airflow to the turbo inlet. Our carbon tube replaces the stock version and has a smoother internal profile with a larger volume. At the filter side it starts with an internal diameter of 4" and maintains this size up to the turbo inlet where is smoothly tapers down. The tube features integral brackets which help to secure the tube in a fixed location.
Compatible models
- BMW M2 (2023+, G87)
- BMW M3 Saloon (2020+, G80)
- BMW M3 Touring (2022+ G81)
- BMW M4 Coupe (2020-2024, G82 Pre-LCI)
- BMW M4 CSL (2022+,G82)
- BMW M3 CS (2022+, G80)
- BMW M4 Coupe (2024+, G82 LCI)
- BMW M4 Convertible (2020-2024, G83 Pre-LCI)
- BMW M4 Convertible (2024+, G82 LCI)
