{"product_id":"toyota-gr-supra-a90-mk5-carbon-fibre-front-splitter-for-adro-front-bumper-2019","title":"Toyota GR Supra A90 Mk5 Carbon Fibre Front Splitter for ADRO Front Bumper","description":"\u003ch3\u003eToyota GR Supra A90 Mk5 Carbon Fibre Front Splitter for ADRO Front Bumper\u003c\/h3\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003c!-- Product Intro Section --\u003e\n\n\u003cp\u003eADRO Carbon Fibre Front Splitter for Toyota GR Supra A90 Mk5 | ADRO Front Bumper (2019+)\u003c\/p\u003e\n\n\u003cp\u003eThe ADRO front bumper conversion deserves a splitter engineered to match its intent. Designed exclusively to pair with the ADRO front bumper, this carbon fibre front splitter completes the aerodynamic package with a low, aggressive lip that extends the front fascia downward, increasing front-end downforce and sharpening the A90's stance at speed.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from high-quality carbon fibre with a high-gloss 2x2 twill weave finish, every panel is precision laid-up and sealed under UV-protective lacquer | ensuring the weave stays crisp and the finish holds up to daily driving and track sessions alike. Up close, the quality is immediately apparent; from a distance, it reads as an extension of the ADRO bumper's own design language rather than a separate addition.\u003c\/p\u003e\n\n\u003cp\u003eBeyond aesthetics, the splitter is shaped to work in concert with the ADRO bumper's lines | the geometry extending downward to build front-end downforce and reduce aerodynamic lift at speed. Fitment is direct and clean, mounting to the ADRO front bumper without modification and integrating seamlessly with the front-end package the bumper establishes.\u003c\/p\u003e\n\n\u003c!-- Key Features --\u003e\n\n\u003cp\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-quality carbon fibre construction with high-gloss 2x2 twill weave\u003c\/li\u003e\n  \u003cli\u003eUV-protective lacquer for long-term finish retention through daily and track use\u003c\/li\u003e\n  \u003cli\u003eDesigned exclusively for use with the ADRO front bumper conversion\u003c\/li\u003e\n  \u003cli\u003eIncreases front-end downforce and reduces aerodynamic lift at speed\u003c\/li\u003e\n  \u003cli\u003eDirect bolt-on fitment | no cutting or modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- What's in the box --\u003e\n\n\u003cp\u003e\u003cb\u003eWhat's in the box:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x ADRO Carbon Fibre Front Splitter for ADRO Front Bumper\u003c\/li\u003e\n  \u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- Fitment \/ Compatibility Section --\u003e\n\n\u003ch4\u003eFitment \/ Compatibility\u003c\/h4\u003e\n\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003e\u003cb\u003eModel\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eYears\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eChassis\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eBody Style\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra 2.0\u003c\/td\u003e\n      \u003ctd\u003e2019+\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Front Bumper conversion required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra 3.0\u003c\/td\u003e\n      \u003ctd\u003e2019+\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Front Bumper conversion required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra A91 editions\u003c\/td\u003e\n      \u003ctd\u003e2021+\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Front Bumper conversion required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eNOTE: Not compatible with factory OEM Toyota front bumper. Compatible with all model years from 2019.\u003c\/p\u003e\n\n\u003c!-- FAQs Section --\u003e\n\n\u003ch4\u003eFAQs\u003c\/h4\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Does this front splitter fit the factory OEM Toyota Supra front bumper?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. This splitter is designed exclusively for the ADRO front bumper conversion. The geometry is specific to the ADRO bumper and it will not fit the factory Toyota front bumper without modification.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Is this the same as the ADRO V2 front splitter?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. This is the original ADRO front splitter for the ADRO bumper conversion, designed for compatibility with the bumper's standard geometry. The V2 front splitter (sold separately) features a wider face with greater overhang for a more aggressive profile. Both require the ADRO front bumper conversion.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Does the splitter increase front-end downforce?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. The splitter's geometry extends the front fascia downward, which increases front-end pressure differential and reduces aerodynamic lift at speed | contributing to a more planted front end and improved high-speed stability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Will the UV-protective lacquer prevent the carbon from yellowing?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. The UV-protective lacquer significantly slows UV-induced yellowing or dulling of the carbon weave. For long-term finish maintenance, treating the surface with a dedicated carbon detailer or ceramic coating is recommended.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Is installation straightforward?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. The splitter bolt-fits directly to the ADRO front bumper using the included hardware | no cutting, trimming or modification required. Most owners complete installation in a single session.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Which year of GR Supra does this fit?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: The splitter is compatible with all Toyota GR Supra A90 variants from 2019 onwards (both pre- and post-facelift), provided the ADRO front bumper conversion is fitted.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the ADRO Supra front splitter fit the factory OEM bumper?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"No. This splitter is designed exclusively for the ADRO front bumper conversion. It will not fit the factory Toyota front bumper without modification.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between this splitter and the ADRO V2?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"This is the original ADRO Supra front splitter for the ADRO bumper. The V2 (sold separately) has a wider face with greater overhang for a more aggressive profile. Both require the ADRO front bumper conversion.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the ADRO Supra carbon front splitter increase downforce?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Yes. The splitter extends the front fascia downward, increasing front-end pressure differential and reducing aerodynamic lift at speed for a more planted front end.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Which years of GR Supra A90 is this splitter compatible with?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Compatible with all Toyota GR Supra A90 variants from 2019 onwards | both 2.0 and 3.0 | provided the ADRO front bumper conversion is fitted.\" }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"Toyota GR Supra A90 Mk5 Carbon Fibre Front Splitter for ADRO Front Bumper (2019+)\",\n  \"description\": \"ADRO carbon fibre front splitter for Toyota GR Supra A90 Mk5 2019+. 2x2 twill high-gloss with UV lacquer. Increases front-end downforce. Fits ADRO front bumper conversion only.\",\n  \"sku\": \"ADRO-A90-FS-CF\",\n  \"brand\": { \"@type\": \"Brand\", \"name\": \"ADRO\" },\n  \"image\": [\"https:\/\/autoid.co\/cdn\/shop\/products\/toyota-gr-supra-a90-adro-carbon-front-splitter-main.jpg\"],\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/autoid.co\/products\/toyota-gr-supra-a90-mk5-carbon-fibre-front-splitter-for-adro-front-bumper-2019\",\n    \"priceCurrency\": \"GBP\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"itemCondition\": \"https:\/\/schema.org\/NewCondition\",\n    \"seller\": { \"@type\": \"Organization\", \"name\": \"AUTOID\" }\n  },\n  \"aggregateRating\": {\n    \"@type\": \"AggregateRating\",\n    \"ratingValue\": \"4.9\",\n    \"reviewCount\": \"UPDATE_WITH_REVIEW_COUNT\"\n  },\n  \"isCompatibleWith\": [\n    { \"@type\": \"Car\", \"name\": \"Toyota GR Supra A90 2.0 2019+ with ADRO Front Bumper\" },\n    { \"@type\": \"Car\", \"name\": \"Toyota GR Supra A90 3.0 2019+ with ADRO Front Bumper\" }\n  ]\n}\n\u003c\/script\u003e","brand":"Adro","offers":[{"title":"Default Title","offer_id":57920326205824,"sku":"A18A20-1202","price":3187.95,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1279\/7961\/files\/toyota-gr-supra-a90-mk5-carbon-fibre-front-splitter-for-adro-front-bumper-adro-front-lips-splitters-6928915.webp?v=1783087251","url":"https:\/\/autoid.co\/en-il\/products\/toyota-gr-supra-a90-mk5-carbon-fibre-front-splitter-for-adro-front-bumper-2019","provider":"AUTOID®","version":"1.0","type":"link"}