{"product_id":"toyota-gr-supra-a90-mk5-carbon-fibre-front-bumper-canards-for-adro-front-bumper","title":"Toyota GR Supra A90 Mk5 Carbon Fibre Front Bumper Canards for ADRO Front Bumper","description":"\u003ch3\u003eToyota GR Supra A90 Mk5 Carbon Fibre Front Bumper Canards for ADRO Front Bumper\u003c\/h3\u003e\n\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003c!-- Product Intro Section --\u003e\n\n\u003cp\u003eADRO Front Bumper Canards for Toyota GR Supra A90 Mk5 (2020–2026)\u003c\/p\u003e\n\n\u003cp\u003eCanards are one of those upgrades that look subtle in isolation and transformative once fitted to the car. ADRO's Front Bumper Canards for the Toyota GR Supra A90 Mk5 are designed to add layered, motorsport-derived definition to the front corners of the vehicle, integrating cleanly into the existing geometry of the ADRO Facelift Front Bumper rather than sitting on top of it like a generic aftermarket addition.\u003c\/p\u003e\n\n\u003cp\u003eDesigned specifically to fit between the bumper vent and the outer edge of the ADRO Facelift Front Bumper, the leading edge follows the bumper crease while the trailing edge wraps neatly into the wheel arch. The result is a sharper, more aggressive front-end profile that feels like an extension of the bumper design itself.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from pre-preg carbon fibre with a tight 2x2 twill weave and finished in deep high-gloss lacquer, these canards are supplied as a complete matched set with two left-hand and two right-hand pieces. The weave is mirrored symmetrically across both sides and the gloss finish is consistent with ADRO's V2 Front Lip and wider GR Supra aero range, creating a cohesive front-end package.\u003c\/p\u003e\n\n\u003c!-- Key Features --\u003e\n\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eADRO Front Bumper Canards for Toyota GR Supra A90 Mk5\u003c\/li\u003e\n  \u003cli\u003eSold as a complete matched set - 2 left-hand and 2 right-hand pieces, 4 pieces total\u003c\/li\u003e\n  \u003cli\u003ePre-preg carbon fibre construction with 2x2 twill weave\u003c\/li\u003e\n  \u003cli\u003eDeep high-gloss lacquer finish\u003c\/li\u003e\n  \u003cli\u003eFlush-fit design between bumper vent and outer edge\u003c\/li\u003e\n  \u003cli\u003eDesigned to read as part of the original bumper geometry\u003c\/li\u003e\n  \u003cli\u003eCompatible with ADRO Facelift Front Bumper A18A20-2101 only\u003c\/li\u003e\n  \u003cli\u003eDesigned to pair with ADRO Front Lip V2 A18A20-1203 for the most cohesive finish\u003c\/li\u003e\n  \u003cli\u003eTape-on and bolt-on installation both supported\u003c\/li\u003e\n  \u003cli\u003e3M automotive adhesive tape included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- What's In The Box --\u003e\n\n\u003cp\u003e\u003cb\u003eWhat's in the box?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Set of ADRO Pre-Preg Carbon Fibre Canards - 2 LH + 2 RH\u003c\/li\u003e\n  \u003cli\u003e3M Adhesive Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- Fitment \/ Compatibility Section --\u003e\n\n\u003ch4\u003eFitment \/ Compatibility\u003c\/h4\u003e\n\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003e\u003cb\u003eModel\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eYears\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eChassis\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eBody Style\u003c\/b\u003e\u003c\/th\u003e\n      \u003cth\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra 2.0\u003c\/td\u003e\n      \u003ctd\u003e2020–2026\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Facelift Bumper A18A20-2101 required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra 3.0\u003c\/td\u003e\n      \u003ctd\u003e2020–2026\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Facelift Bumper A18A20-2101 required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eToyota GR Supra A91 editions\u003c\/td\u003e\n      \u003ctd\u003e2021–2026\u003c\/td\u003e\n      \u003ctd\u003eA90\/J29\u003c\/td\u003e\n      \u003ctd\u003eCoupe\u003c\/td\u003e\n      \u003ctd\u003eADRO Facelift Bumper A18A20-2101 required\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cb\u003eImportant:\u003c\/b\u003e These canards are not compatible with the factory OEM Toyota GR Supra front bumper. The ADRO Facelift Front Bumper A18A20-2101 is mandatory for fitment.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this fits your car? Call our team on the number at the top of the page or email \u003ca href=\"mailto:info@autoid.co\"\u003einfo@autoid.co\u003c\/a\u003e with your vehicle details.\u003c\/p\u003e\n\n\u003c!-- FAQs Section --\u003e\n\n\u003ch4\u003eFAQs\u003c\/h4\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Will these canards fit the factory OEM GR Supra front bumper?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: No. These canards are designed exclusively for the ADRO Facelift Front Bumper A18A20-2101. The geometry is specific to the ADRO bumper's vent position and outer edge profile, so they will not fit the factory Toyota front bumper and there is no adapter route available.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Do the canards also require the ADRO V2 Front Lip to be fitted?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: The canards are primarily designed to work alongside the ADRO Facelift Front Bumper and ADRO Front Lip V2 A18A20-1203 as part of a complete front-end package. They can be fitted to the ADRO bumper without the V2 lip, but pairing all three components gives the most cohesive finished result.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: How are the canards attached - tape or bolts?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Both options are supported. The canards can be mounted using the included 3M automotive adhesive tape for a clean, hardware-free finish, or bolted on for owners who prefer a mechanical fixing. The design accommodates both installation methods.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Is the carbon weave matched between the left and right canards?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. All four pieces are laid up from the same pre-preg carbon cloth with consistent 2x2 twill alignment. The weave is mirrored left-to-right, giving a symmetrical finish under direct light.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Are these canards compatible with the GR Supra 2.0 four-cylinder as well as the 3.0?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. Compatibility is determined by the front bumper, not the engine. All GR Supra A90\/J29 variants, including 2.0 and 3.0 models, are compatible provided they are fitted with the ADRO Facelift Front Bumper.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eQ: Can AUTOID fit these at their facility?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. AUTOID offers professional fitting at our Chelmsford, Essex facility. Contact \u003ca href=\"mailto:info@autoid.co\"\u003einfo@autoid.co\u003c\/a\u003e to book an appointment. We also have a network of partnered dealers globally for local installation.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will ADRO Supra canards fit the factory OEM front bumper?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"No. These canards are designed exclusively for the ADRO Facelift Front Bumper (A18A20-2101). The geometry is specific to the ADRO bumper vent position and will not fit the factory Toyota front bumper.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How are the ADRO GR Supra canards attached?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Both tape and bolt-on installation are supported. The included 3M automotive adhesive tape gives a clean, hardware-free finish. Bolt-on mechanical fixing is also accommodated in the design.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Are the ADRO Supra canards compatible with both 2.0 and 3.0 variants?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Yes. Compatibility is determined by the front bumper, not the engine. All GR Supra A90 variants fitted with the ADRO Facelift Front Bumper are compatible.\" }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the carbon weave matched between all four canard pieces?\",\n      \"acceptedAnswer\": { \"@type\": \"Answer\", \"text\": \"Yes. All four pieces use the same pre-preg carbon cloth with consistent 2x2 twill alignment. The weave is mirrored symmetrically left-to-right.\" }\n    }\n  ]\n}\n\u003c\/script\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\/\",\n  \"@type\": \"Product\",\n  \"name\": \"Toyota GR Supra A90 Mk5 Carbon Fibre Front Bumper Canards for ADRO Front Bumper\",\n  \"description\": \"ADRO pre-preg carbon fibre canards for Toyota GR Supra A90 Mk5. Matched pair (2 LH + 2 RH). Compatible with ADRO Facelift Front Bumper A18A20-2101 only. 3M tape included.\",\n  \"sku\": \"A18A20-1601\",\n  \"brand\": { \"@type\": \"Brand\", \"name\": \"ADRO\" },\n  \"image\": [\"https:\/\/autoid.co\/cdn\/shop\/products\/toyota-gr-supra-a90-adro-carbon-canards-main.jpg\"],\n  \"offers\": {\n    \"@type\": \"Offer\",\n    \"url\": \"https:\/\/autoid.co\/products\/toyota-gr-supra-a90-mk5-carbon-fibre-front-bumper-canards-for-adro-front-bumper\",\n    \"priceCurrency\": \"GBP\",\n    \"availability\": \"https:\/\/schema.org\/InStock\",\n    \"itemCondition\": \"https:\/\/schema.org\/NewCondition\",\n    \"seller\": { \"@type\": \"Organization\", \"name\": \"AUTOID\" }\n  },\n  \"aggregateRating\": {\n    \"@type\": \"AggregateRating\",\n    \"ratingValue\": \"4.9\",\n    \"reviewCount\": \"UPDATE_WITH_REVIEW_COUNT\"\n  },\n  \"isCompatibleWith\": [\n    { \"@type\": \"Car\", \"name\": \"Toyota GR Supra A90 2.0 2020-2026 with ADRO Facelift Front Bumper\" },\n    { \"@type\": \"Car\", \"name\": \"Toyota GR Supra A90 3.0 2020-2026 with ADRO Facelift Front Bumper\" }\n  ]\n}\n\u003c\/script\u003e","brand":"Adro","offers":[{"title":"Default Title","offer_id":57995927290240,"sku":"A18A20-1601","price":1761.56,"currency_code":"ILS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1279\/7961\/files\/toyota-gr-supra-a90-mk5-carbon-fibre-front-bumper-canards-for-adro-front-bumper-adro-bumper-inserts-trim-5845570.webp?v=1783087241","url":"https:\/\/autoid.co\/en-il\/products\/toyota-gr-supra-a90-mk5-carbon-fibre-front-bumper-canards-for-adro-front-bumper","provider":"AUTOID®","version":"1.0","type":"link"}